<%NUMBERING1%>.<%NUMBERING2%>.<%NUMBERING3%> PRTG Manual: Reports Settings

In the web interface, click on the Reports entry in the main menu to show the reports main screen. Click on a report's name to select it. Using the reports tabs you can access all functionalities and settings for this report. Click on the Go to all reports button at the bottom of the page to return to the list of Reports.

Report Tabs

Report Tabs

Note: This documentation refers to the PRTG System Administrator user accessing the Ajax interface on a master node. For other user accounts, interfaces, or nodes, not all of the options might be available as described. When using a cluster installation, failover nodes are read-only by default.

Run Now

In the Run Now tab you can execute a report immediately with the settings configured. Please see View and Run Reports section.

Stored Reports

In the Stored Reports tab you can view reports created in the past. Please see View and Run Reports section.

Settings

Click on the Settings tab to open a report's settings.

Basic Report Settings

Report Name

Enter a meaningful name to identify this report.

Template

Select a template for the report. This will define the overall look of your report. There are several report templates delivered with PRTG. They also define in which detail (interval) monitoring data is included. You can choose from templates in the following categories:

  • Data Table Only: Create a report with data tables only. Choose from several intervals.
  • Graph Only: Create a report with graphs only. Choose from several intervals.
  • Graph with Data Table: Create a report with graphs and data table. Choose from several intervals.
  • List of Sensors: Create a report in a compact sensor list style. This is available with and without graphs.
  • Top 10 Uptime/Downtime: Create a report with up to 10 objects with the highest uptime and downtime each. You can choose between data in percent and hours.
  • Top 100 Highest and Lowest: Create a report with up to 100 objects with the highest and lowest average values. Choose from different intervals.
  • Top 100 Uptime/Downtime: Create a report with up to 100 objects with the highest uptime and downtime each. You can choose between data in percent and hours.

Monitoring data within an interval is averaged. See also the comment on data averaging in the Reports (Automatic Averaging) section. For information on how to modify templates, please see More section below.

Security Context

Define the user account that will be used for access to monitoring data. The report will only contain objects which the selected user is allowed to view. Please choose a user from the list. The available users depend on your configuration. By default, this is the user that created the report. PRTG Administrator users can change this setting.

Timezone

Define the time zone that will be used for all date-specific settings in this report (see below). Select a time zone from the dropdown list.

Paper Size

Define the paper size in which PDF reports will be created. Choose between:

  • A4: Use German DIN A4 format.
  • Legal: Use US legal paper format.
  • Letter: Use US letter paper format.

Sensors

Cluster Node

This field is only visible when running PRTG in Clustering mode. Define the cluster node the report will take monitoring data from. Choose a cluster node from the list. The available options are specific to your configuration. Select All nodes to create a report with data from all of your cluster nodes.

Note: A report for all nodes will include data of the primary sensor channels only, not for other sensor channels.

Note: If you select a failover node, the report will not show data from the local probe or from a remote probe and might be empty.

Add Sensors Manually

If you want to manually choose the sensors included in this report, please save settings and switch to the Select Sensors Manually tab.

Add Sensors by Tag

Define the sensors included in this report by tag. Enter one or more tags. The report covers all sensors that have at least one of the tags. Please enter a string or leave the field empty.

You can also use plus (must have) and minus (must not have) signs to categorize tags, for example, +snmp;–wmi (must have the tag snmp and must not have the tag wmi). See section Tags for details.

Note: Tags are inherited invisibly and automatically. So, for example, if you enter the tag of a group here, the report will include all sensors within this group. For detailed information, see Inheritance of Settings section. For sensors that are added by tag, all sensor channels are included in the report automatically, except All nodes is selected in the Cluster Node selection above.

Filter Sensors by Tag

Further filter sensors. This is used in combination with sensors that are added manually, or added implicitly with their manually added parent objects. From those sensors, only the ones with the tags entered here will be included. Enter one or more tags to include sensors in the report; hit enter, space, or comma to confirm a tag. Please enter a string or leave the field empty.

You can also use plus (must have) and minus (must not have) signs to categorize tags, for example, +snmp;–wmi (must have the tag snmp and must not have the tag wmi). See section Tags for details.

Schedule

Report Schedule

Define when the report will be run. Choose between:

  • No schedule (run interactive/on-demand only): Only use the options in the Run Now tab to start generation of this report manually.
  • Every full hour: Run this report every 60 minutes.
  • Every day at a specific hour: Run this report every 24 hours.
  • Every specific day of a week: Run this report every 7 days. Specify the day below.
  • Every specific day of a month: Run this report on a specific day every month. Specify below.
  • The day after a quarter is finished (i.e. at 1. April for the 1. January - 31. March Quarter): Run this report for every quarter of the year.
  • Every specific date: Run this report on a specific date every year. Specify below.

Specify Hour

This setting is only visible if specific hour is selected above. From the list, please select the hour you want to run the report at. PRTG will automatically choose a suitable time within this hour, usually at the beginning of it.

Specify Day

This setting is only visible if the day of week or day of month option is selected above. From the list, please select a day of week or a date of the month you want to run the report. When selecting Last, the report will always run on the last day of the month, regardless of how many days the month has. When selecting a date that does not exist in every month, e.g. the 30th in May, PRTG will automatically run the report on the last day of this month.

Specify Date

This setting is only visible if the specific date option is selected above. Please enter a valid date in the form DD.MM, e.g. 31.12. The report will be run annually on this date.

Scheduled Processing

This setting is only visible if one of the schedule options is selected above. Define what will be done when generating a report. Choose between:

  • Save report to disk and send it by email: Create a PDF file of the report, store it, and send it via email. You will find the report in your emails and in the Stored Reports tab. Define an email address below.
  • Save report to disk only: Create a PDF file of the report and store it. Once finished, you will find it in the Stored Reports tab and a ToDo ticket will be created. By default, PRTG will send out a notification mail to the administrator in this case.
  • Send report by email only: Create a PDF file of the report and send it via email once it is finished. The report is not permanently stored, but only emailed. Define an email address below.

Note: For large PDF reports, PRTG will automatically split the output into separate files to avoid huge PDF files. You can change the number of sensors included into each PDF file by editing the report templates manually. See More section below.

Email Address

This setting is only visible if a send by email option is selected above. Please enter a valid email address the report will be sent to. To enter more addresses, separate them by comma. PRTG will send a message with all recipients in the "To" field of the email. Note: Configuration for outgoing email can be changed in the System Administration—Notification Delivery settings.

Send to User Group

This setting is only visible if a send by email option is selected above. From the drop down list, please choose a user group to send an email with the report to all members of this group (you can edit user groups under System Administration—User Groups). Note: If you define individual email addresses (see field above) and a user group, the report will be sent to the individual email addresses as well as to the members of the selected user group. In both cases, PRTG will send one message with all recipients in the "To" field of the email.

Compression

This setting is only visible if a send by email option is selected above. Specify if the attached report files will be compressed before sending. Choose between:

  • Uncompressed: The report files will not be compressed before they are sent by email.
  • Compressed: The report files will be compressed to a ZIP file before they are sent by email.

Period

Reported Period

Define the time span covered by the report. Choose between:

  • Current: Use monitoring data of the current period. Define the period type below.
  • Previous: Use monitoring data of the last period. Define the period type below.

Report Period Type

Define the type of period you want to create a report for. Choose between:

  • Day
  • Week
  • Month
  • Quarter (January-March, April-June, etc.)
  • Year

Depending on your selection, different period selections are shown below.

Day Period

This setting is only visible if day period type is selected above. Define the hours when a day starts and ends. Choose from the list of hours. Default setting is 0:00-23:59.

Week Period

This setting is only visible if week period type is selected above. Define when a week starts and ends. Choose between:

  • Monday-Sunday: A reported week will start on Monday.
  • Saturday-Friday: A reported week will start on Saturday.
  • Sunday-Saturday: A reported week will start on Sunday.

Month Period

This setting is only visible if month period type is selected above. Define when a month starts and ends. Choose between:

  • 1.-last day: A reported month will start on the first and end on last of the month.
  • 15.-14.: A reported month will start von 15th and end on 14th of the month.

Year Period

This setting is only visible if year period type is selected above. Define when a year starts and ends. Choose between:

  • 1/1-12/31: A reported year will start on January 1st.
  • 7/1-6/30: A reported year will start on July 1st.

Report only for specific hours-of-day (Schedule)

Include certain time spans within the defined period only. When a schedule is selected, only monitoring data for specified hours or weekdays within the defined period are included in the report. Select None to include all available monitoring data in the report, or choose a schedule. For example, select the schedule Weekdays to exclude all weekends from the report. The available schedules depend on your configuration. For more information, please see Account Settings—Schedules section.

Percentile Settings

Show Percentile

Define if percentiles will be included in the report. Choose between:

  • Off: Do not show percentiles
  • On: Add a column to data tables, showing percentiles for every sensor channel.

Note: Percentiles are not available for all report templates. If a template does not support percentiles, they will simply not show up in the report, even when you enable this setting.

Show Percentile

This setting is only visible when showing percentiles. Enter the percentile number you want to calculate. If you choose, for example, to calculate the 95th percentile, enter "95" here and 5 % of peak values will be discarded.

Percentile Average (seconds)

This setting is only visible when showing percentiles. This is the averaging interval in seconds, which is used for percentile calculation. Default value is 300 which is equivalent to 5 minutes.

Percentile Mode

This setting is only visible when showing percentiles. Choose the mode for percentile calculation:

  • Discrete: Discrete percentile chooses the next smaller discrete value.
  • Continuous: Continuous percentile interpolates between discrete values.

For details, see section Calculating Percentiles.

Report Comments

Introduction

Define a custom text that will show up on the first page of the report. Please enter a string or leave the field empty.

Footer Comments

Define a custom text that will show up on the last page of the report. Please enter a string or leave the field empty.

Access Rights

User Group Access

Define which user group(s) will have access to the object you're editing. A table with user groups and right is shown; it contains all user groups from your setup. For each user group you can choose from the following access rights:

  • Inherited: Use the settings of the parent object.
  • None: Users in this group cannot see or edit the object. The object does not show up in lists.
  • Read: Users in this group can see the object and review its settings.
  • Write: Users in this group can see the object, as well as review and edit its settings. However, they cannot edit access rights settings.
  • Full: Users in this group can see the object, as well as review and edit its settings and edit access rights settings.

You can create new user groups in the System Administration—User Groups settings.

Click on the Save button to store your settings. If you change tabs or use the main menu, all changes to the settings will be lost!

Select Sensors Manually

Click on the Select Sensors Manually tab to manually choose sensors that will be included in the report. You will see a split screen: On the left side, your list of objects is show (empty in the beginning), and on the right side, you see a less colorful view of your device tree, as known from the device tree's Management tab. Adding objects to the report is very easy.

Manual Selection for Reports

Manual Selection for Reports

  • Add Items
    From the device tree on the right side, drag objects and drop them on the list on the left side. This can be entire probes, groups, devices, or single sensors. Each dropped object will be added immediately as a new list item. Repeat this procedure as often as you wish until you have added all desired items to the library. Note: Objects that already exist in the list on the left side will be grayed out in the device tree on the right side.
  • Select Sensor Channels
    If in the report settings one specific cluster node is selected and if you are adding a sensor to the selection, you can specify the sensor channels that will be included in the report. By default, all channels are selected. To exclude a channel from the report, simply remove the check mark in front of a channel's name. Note: If All nodes is selected in the report's Cluster Node selection, the channel selection is not available, but only the primary channel of every sensor is included automatically.
  • Remove
    To remove any objects from the report, click on the trash can symbol next the respective list item, or select several list items while holding down the Ctrl key and click on the green trash symbol appearing at the top of the list.

Your selection is saved automatically, and there is no undo function. Note: The final report will include both sensors selected manually and those selected by tag.

Sensors Selected by Tag

Click on the Sensors Selected by Tag tab to view all sensors that are added to the report depending on the report's Add Sensors by Tag setting. In the table list, you will see all sensors that are added by tag. This is for your information only, you cannot change sensors here. However, you can switch to the report's Settings tab and change the tabs that are used to add sensors. Additionally, you can also exclude sensors with certain tabs there. The final report will include both sensors selected manually and those selected by tag.

For sensors that are added by tag, all sensor channels are included in the report automatically, except All nodes is selected in the report's Cluster Node selection. In this case, only the primary channel of every sensor is included. Note: The final report will include both sensors selected manually and those selected by tag.

Comments

In the Comments tab you can enter free text for each object. This can be used for documentation purposes or to leave information for other users.

More

Knowledge Base: Can I change the number of PDFs created by a report?

Knowledge Base: How do I modify PRTG's report templates?

Knowledge Base: How can I show full channel names below report graphs?

 

 

Reports—Topics

Keywords: